Demo / Used Equipment

Manufacturer: Metalbud Nowicki

Condition: New, Discontinued Product Line

This is a new unit we have been in procession of since 2004. Fully operational and guaranteed to operate trouble free. Machine is designed for easy to use push button operation.

Call today for a quote!

Condition: Two reconditioned units available, fully tested to perform like new at a fraction of the cost.

Specs :
· 224 Blades/ 32 incisions per inch
· Machine Dimensions: 52" (L) x 24" (W) x 40" (H)
· Voltage Requirements: 208V/ 3 phase
· Amps: Approx. 8 amps @ 208V
· Nominal Production Rate: 3,000 lbs/hr
· Conveyor Speed: 3.3 ft/min
· Maximum Product Height: LO Position = 7" / HI Position = 9"
· Conveyor Width: 12"

Performance Guarantee!

Call today for a quote!

Condition: Used/ Reconditioned

Full Size Dual Head Tenderizer with adjustable head height.

Specs:
· 448 Blades/ 32 incisions per inch
· Machine Dimensions: 73"L x 24"W x 60" H
· Voltage Requirements: 208V/ 3 phase
· Amps: Approx. 16 amps @ 208V
· Nominal Production Rate: 5,000 lbs/hr
· Conveyor Speed: 5.5 ft/min
· Maximum Product Height: LO Position = 7" / HI Position = 9"
· Conveyor Width: 12"

Performance Guarantee!

Call today for a quote!

Condition: Demo Unit

· Auto/ Semi-Auto Operation
· Sensor/ Counter Indexing
· Seperate Tray Temp. Control
· Seal 2 No.3 Trays
· Up to 10 cycles per minute
· Simple to operate

110V/1PH/60HZ

Call today for a quote!

Condition: Demo Unit

• Stainless Steel construction
• Variable speed motor
• Vacuum Gauge
• Simple to operate

Specs:
• 22 lb. capacity
• 2.4m3/h dry vacuum pump
• 110V/1ph/60Hz-12 amps

Call today for a quote!

Condition: Demo Unit

· Hands-free operation through use of conveniently located knee lever to control piston movement
· Adjustable speed and pressure
· 3 Sizes of straight horns included
· Easily removable piston and lid gaskets for quick and easy cleaning.
· Heavy duty stainless steel construction, built to last.
· Designed to make oil changes easy, plus replaceable oil filters.
· Simple to operate.

220V/ 1PH/ 60HZ

Call today for a quote!

Condition: Used, reconditioned

Features: Conveyer with stack and count system, positive knife drive, adjustable feed screws, knockout cup assembly.

Production: 2588 patties per hour, Max. Patty weight 10oz. Max. Patty size 6" dia., Max. Patty thickness 1", 200 pound hopper, Paper sizes 4-1/2", 5", 5-1/2" & 6". Multiple mold plate sizes available.

Electrical: 2 HP main drive, 208Volt, 3 phase

Sanitation: USDA approved, Conveyor belt releases for easy clean up, Stainless steel construction, Delrin mold plates, 16 removable parts to clean and sanitize.

Performance Guarantee!

Call today for a quote!

Model: EKH-346

Condition: Old stock/ discontinued model

Features: One step shrink wrap and seal, digital controls, adjustable chamber height, option of seal only mode or shrink and seal, Teflon coated sealing blade. Specs: Sealing area 12" x 18.25", Power 110V/ 60Hz, Max wraps per minute=9.

Call today for a quote!

Condition: New, removed from demo machine.

Features: 2 HP, Single stage rotary vacuum pump, direct drive, air cooled, oil sealed, continuous duty, quiet operation.

Technical Data: Air Displacement=28CFM, End Vacuum 29.9 inHG/ ½ Torr. 230/460V 3 phase, NPT inlet connection.

Call today for a quote!

Condition: Used/ Reconditioned

Features: 10 HP motor, Single stage rotary vacuum pump, direct drive, air cooled, oil sealed, continuous duty, quiet operation.

Technical Data: Air displacement-180CFM, End Vacuum 29.9inHG., 230/460V 3 phase, NPT inlet connection.

Call today for a quote!

Condition: Lightly Used/ Removed from machine to install larger pump.

Features: 5HP motor, Single stage rotary vacuum pump, direct drive, air cooled, oil sealed, continuous duty, quiet operation.

Technical Data: Air displacement-63CFM, End Vacuum 29.9inHG., 230/460V 3 phase, NPT inlet connection.

Call today for a quote!