|
|
Promarks Equipment
Processing[ top ] Vacuum Tumbling | TM1000 - 4000
The TM Series massagers are constructed of heavy-duty stainless steel, with a variable speed drum, continuous vacuum and reverse discharge function. The Busch vacuum pump is protected by an integrated liquid trap system. Ideal machine for marinating a variety of products. Improves quality and increases productivity resulting in higher profit margins.
Options:
• Single phase pump motor(up to 100m3/h)
• Pump upgrade
• Voltage
• Buggy (200L,300L)
• Buggy dumper
• Suction tank
• Custom sizes available
 |
| Technical Data |
| MODELS |
TM–1000 |
TM–1500 |
TM–2000 |
TM–3000 |
TM–4000 |
| Massager Capacity |
1000 lbs./454kg |
1500 lbs./680kg |
2000 lbs./900kg |
3000 lbs./1360kg |
4000 lbs./1814kg |
| Vacuum Pump Capacity |
63m3/h(3hp) |
63m3/h(3hp) |
100m3/h(5hp) |
202m3/h(8hp) |
202m3/h(8hp) |
| Voltage |
230V/3ph/60Hz / 20amp |
230V/3ph/60Hz / 20amp |
230V/3ph/60Hz / 30amp |
230V/3ph/60Hz / 30amp |
230V/3ph/60Hz / 33amp |
Machine Size
WxLxH |
43"x76"x67"
1116x1926x1708mm |
50"x80"x70"
1274x2031x1787mm |
54"x89"x78"
1374x2264x1987mm |
62"x97"x87"
1568x2473x2084mm |
62"x123"x82"
1568x3131x2084mm |
| Machine Weight |
1430 lbs.(650kg) |
1760 lbs.(800kg) |
2750 lbs.(1250kg) |
3520 lbs.(1600kg) |
3960 lbs.(1800kg) |
Specifications are subject to change without notice. |
 | TM150 / TM300 / TM500
The TM Series tumblers/massagers are constructed of heavy-duty stainless steel, with a variable speed drum, continuous vacuum and reverse discharge function. Vacuum pumps are protected by a integrated liquid trap system. Ideal machine for marinating a variety of products. Improves quality and increases productivity resulting in higher profit margins.
• Features Continuous Vacuum Tumbling
• Variable Speed Drum
• Forward and Reverse Jog
• Programmable water resistant control panel
• Complete wash down design
• Integrated safety system
• Adjustable vacuum controller
|
| Technical Data |
| MODELS |
TM–150 |
TM–300 |
TM–500 |
| Capacity |
154 lbs./70kg |
308 lbs./140kg |
660 lbs./300kg |
| Vacuum Pump Capacity |
6m3/h(1/2hp) |
21m3/h(1 1/4hp) |
21m3/h(1 1/4hp) |
| Voltage |
110V/1ph/60Hz / 15amp |
110V/1ph/60Hz / 20amp |
110V/1ph/60Hz / 20amp |
Machine Size
WxLxH |
51"x36"x55"
1280x910x1380mm |
53"x36"x58"
1350x910x1460mm |
59"x36"x65"
1490x910x1660mm |
| Machine Weight |
440 lbs.(200kg) |
572 lbs.(260kg) |
1056 lbs.(480kg) |
Specifications are subject to change without notice. |
 | TM20 / TM40
• Variable Drum Speed Control
• Clear see through lid
• Built in water separator
• Stainless Steel construction
• Cycle timer
|
| Technical Data |
| MODELS |
TM–20 |
TM–40 |
| Capacity |
22 lbs./10kg |
44 lbs./20kg |
| Vacuum Pump Capacity |
2.4m3/h |
2.4m3/h |
| Voltage |
110V/1ph/60Hz / 12amp |
110V/1ph/60Hz / 13amp |
Machine Size
WxLxH |
22"x18"x24"
570x465x610mm |
23"x21"x27"
570x525x680mm |
| Machine Weight |
66 lbs.(30kg) |
77 lbs.(30kg) |
Specifications are subject to change without notice. |
[ top ] Bowl Cutter | TCM Series
Benefits:
• Enhances overall product quality (color, appearance, bite, and texture) for increased customer appeal
• Improves product yields for increased revenue.
• Increases production.
• Suitable for mixing minced meat, minced fish and ham with seasoning.
• Suitable for soy protein and gluten protein, combine water or oil for emulsification.
• Suitable for meat and vegetable cutting | Standard Features:
• 6 Knives for High-Quality Production
• Two Speed Bowl Control
• Variable Speed Knife
• Heavy Duty Stainless Steel Bowl Construction
• Safety Bowl Break Mechanism
• Product Discharge System
• Digital Temp Display
• Digital water resistant control panel (IP 56)
Options:
• Variable Speed Bowl Control
• Voltage |
|
| Technical Data |
| MODELS |
TCM–65A |
TCM–130 |
TCM–330 |
| Bowl Capacity |
65L / 14.3gal |
130L / 28.6gal |
330L / 72.5gal |
| Working Ability |
43kg/ounce |
100kg/ounce |
240kg/ounce |
| Motor Rating Knives |
25HP |
40HP |
100HP |
| Motor Rating Bowl |
.5HP |
2HP |
3HP |
| Motor Rating Discharge |
.5HP |
2HP |
5HP |
| Knife Rotation |
0-4200rpm |
0-4200rpm |
0-3000rpm |
| Bowl Rotation |
10/20rpm (60Hz)
8/17rpm (50Hz) |
9.5/19rpm (60Hz)
8/16rpm (50Hz) |
9.5/19rpm (60Hz)
8/16rpm (50Hz) |
| Electric Power Supply |
220v / 3ph / 50/60Hz |
220v / 3ph / 50/60Hz |
220v / 3ph / 50/60Hz |
| Dimensions |
57.4"x51.5"x52.7"
1460x1310x1340mm |
86.4"x74.8"x53"
2200x1900x1350mm |
122"x98.4"x62.5"
3100x2500x1590mm |
| Weight |
900kg (1980lbs) |
2900kg (6380lbs) |
4500kg (9900lbs) |
Specifications are subject to change without notice. |
[ top ] Brine Injector | MSK Series Injectors
The MSK series Brine Injectors will fit virtually any injecting application. Each model incorporates a pressure adjustable needle head, which allows for precise control for bone-in or boneless products. The variable speed head operates at up to 50 strokes per minute. Brine bypass system gives operator full adjustment of pump pressure, which provides a minimum product pick-up of approximately 8% if required. Once injector is adjusted consistent pick-up is maintained batch after batch. Our MSK series consists of a triple filtration system, which includes a portable stainless steel brine tank.
Features:
• Stainless Steel Construction
• Stainless Steel Brine Tank
• Stainless Steel Centrifugal brine pump
• Brine Mixer (MSK44)
• Variable Speed motor drive, up to 50 strokes per minute
• Tenderizer head available (MSK12)
• Easy to read and operate controls
• Easy to clean design with removable injection heads
• Walking beam conveyer(MSK22/44)
• Closed Brine Circulation System
• Triple brine filtration
|
| Technical Data |
| MODELS |
MSK–12 |
MSK–22 |
MSK–44 |
| Injection Needles |
12 |
22 |
44 |
| Motor Power |
.75kw |
2.2kw |
2.2kw |
| Brine Pump Power |
.37kw |
1.1kw |
1.85kw |
| Walking Beam Width |
10"/245mm |
12"/305mm |
16"/406mm |
| Speed |
30~60 stoke/min |
30~60 stoke/min |
30~60 stoke/min |
| Product Clearance |
8"/203mm |
10"/250mm |
10"/250mm |
| Pressure Rating |
0-35 PSI |
0-60 PSI |
0-60 PSI |
| Brine Tank Capacity |
60L/16gal |
140L/31gal |
200L/53gal |
Machine Size
L x W x H |
61"x29"x69"
1285x728x1744mm |
85"x32"x80"
2159x813x2032mm |
87"x36"x80"
2209x915x2032mm |
Specifications are subject to change without notice. |
[ top ] Dicer | PXD-1000
Details:
• Simple pre-pressure adjustment provides precise food shaping.
• Large product tray allows for easy loading of the fill chamber.
• Cutting process begins immediately upon closing the slider.
• View port on cutting chamber enables operator to make instant corrections during cutting process.
• Efficient design of cutting chamber enables diced product to evacuate cutting area quickly and safely.
• Cutting grid designed to be easily removed without tools.
Options:
• Grid sizes available for all dicing applications
• PXD 1000 6,8,10,12,14,17,21,28,42mm
• Double Blade is available for dicer applications requiring a large volume of precision cut small volume.
|
| Technical Data |
| MODELS |
PXD–1000 |
| Machine Output |
1000kg/hr (2200lbs/hr) |
| Load Factor |
1.85KW, 2.5HP |
| Chamber Length |
530mm / 20.85" |
| Cutting Grid Area |
90x90mm / 3.54"x3.54" |
| Cutting Length |
0-32mm / 0-1.33" |
| Rear Pre-Press |
Infinitely Variable |
| Side Compression |
4-Side |
| Cabinet Dimensions (LxWxH) |
1520x650x1065mm / 59.84"x25.6"x42" |
| Cutting Grid Sizes (mm) |
6, 8, 10, 12, 14, 17, 21, 28, 42 |
| Machine Weight |
285 kg (628 lbs) |
Specifications are subject to change without notice. |
[ top ] Piston Stuffer | SS Series Piston Stuffers
You may choose from one of two models – 50-lb. or 100-lb. capacity – to produce fresh sausage, ground meat and poultry, beef jerky and a variety of cheese, dough, pasta and seafood fillings.
• Heavy-duty stainless steel design
• Hands-free operation through use of conveniently located knee lever
• Adjustable pressure with gauge
• Assortment of three straight horns in 12mm, 20mm and 50mm
• Easily removable piston and lid gaskets for quick and easy cleaning
• Drain hole in bottom of cylinder for easy wash down
• Designed to make oil changes easy, plus replaceable oil filters
• 220V Single Phase
• Optional volumetric portioner available
|
| Technical Data |
| MODEL |
SS–50P |
SS–100P |
| Stuffing Capacity |
250lbs/hr |
400lbs/hr |
| Style |
Floor |
Floor |
| Portable |
Yes |
No |
| Variable Speed |
Yes |
Yes |
| Stuffing Tubes Included |
3 |
3 |
| Maximum Tube Diameter |
29mm/1.14" |
47mm/1.85" |
| Tube Height |
1265mm/49.8" |
1265mm/49.8" |
| Stuffer Width |
522mm/20.5" |
555mm/21.8" |
| Stuffer Depth |
760mm/29.9" |
928mm/36.5" |
| Lever Type |
Knee |
Knee |
| Cylinder Vent |
Yes |
Yes |
| Horsepower |
1.0 |
2.0 |
| Voltage |
220 |
220 |
| Phase |
1 |
1 |
| Hertz |
50/60 |
50/60 |
| Amps |
4.6 gal |
5.9 gal |
| Oil Capacity |
17.5L/4.6g |
22.5L/5.9g |
| Net Weight |
160kg/353lbs |
250kg/551lbs |
Note: Actual capacity depends on the density of your product.
Capacities shown represent water. Stuffers require room temporeratures below 60° F.
Specifications are subject to change without notice. |
|
